Pages

Ads 468x60px

Showing posts with label New. Show all posts
Showing posts with label New. Show all posts

Thursday, December 29, 2016

New Autopilot Installation


We have had two autopilots on our Hylas44, but at a couple of times, both have let us down. We were not surprised with our original Robertson as it is very old (1985), but the Furuno has had it's moment too. That left us hand steering through a storm and 72 hrs out from New Zealand. There was just my wife and I. So, we decided after the last "play up" by the Furuno, (going from NZ to Fiji), we would purchase an independent, standalone, autopilot. This is what we installed, a  CPT autopilot, in which information can be found here along with pictures of other types of installations.
We received the package in Fiji after my wife returned to NZ to pick this and other items up. This order was made possible after many phone calls from both ourselves (at sea and using a satellite phone) and our "go between" in NZ. We received the templates via email while at sea (NZ to Fiji); we measured and sent the details back, and the unit was being prepared for export before we even arrived in Fiji. With all the issues that go with ordering an item like this at sea (measurements have to be taken so the correct items can be shipped), we were impressed with the courteous service, the understanding of our situation, and prompt delivery to NZ. We had a limited time frame in which to pick this up from NZ, while my wife was there, and hence the ordering while at sea. All this could have been easier for us if we were ordering while dockside.
We installed following the instruction booklet. We did this dockside and not while at sea. It was straight forward, but you needed a few tools to install; Screw driver, hacksaw verses dremmel, socket set, spanners.
The unit worked very well around Fiji's calm water's. We did not install the belt tensioner as this  was said to be optional. However, in going from Fiji to Vanuatu, the belt would slip and we determined that the tensioner would be needed to prevent this. This happened because we were in bigger seas and the unit had to work a lot harder. Upon reaching Vanuatu, I installed the belt tensioner.
You can see the tensioner mounted on the belt in the picture to the right and above. This proved very satisfactory and did the job well. In sailing from Vanuatu to Australia we tested this unit for the whole seven days it took. At times we had 5 meter swells, beam on, which pushed the boat around a little. We even had to slow the boat down from the 8.5kts-9kts to make the passage a little more comfortable, and yet the CPT autopilot handled these conditions very well. The only time we had to hand steer was when a squall came through at night with 35kt winds and we weren't sufficiently reefed. After reducing sail, the boat went back on autopilot for the rest of the journey with no other issues.
The cost was about $1800 plus some extras and freight. You can get more detail from their web site (linked above) and emailing Jeff. It's a small company, and the service was excellent.
Of note, the specs say the unit uses 0.3 amps, and compared to the Furuno autopilot, which is rated at 3-15 amps, we found this a considerable saving of power usage which we noticed on our battery monitors.
As an aside, we feel the Furuno issue is more to do with the Hydraulic Linear Drive than the Furuno itself. We will investigate this next year. The boat is now in storage till next years cruising season. All projects have been put off till March of next year. (2012)
Read More..

Thursday, December 15, 2016

New Tom Thomson Canoe Photo Pre Fire Chestnut Cruiser


2017 will mark the 100th anniversary of the death of Canadian Artist, Tom Thomson. Probably every Canadian in the art & canoeing world knows of Thomson's mysterious death on Canoe Lake in Algonquin Park. Many books have been written, documentary films have been made, statues adorn town halls and local artists have added their own touch to Thomson's artistic legacy. 

Wood Canvas canoe enthusiasts have often wondered about Thomson's personal canoe, said to be purchased in 1915 from Chestnut Canoe Co. It has assumed to be a Chestnut Cruiser dating from before the 1921 Chestnut Factory fire and was distinctive in its colour - a slate grey colour mixed with one tube of the artists cobalt blue paint. Up until now, the only photo showing the canoe's graceful lines has been this one below, mistakenly dated to 1912 by some books.




However, a new website (TomThomsonArt.ca) has put up a few newly discovered photos which includes a clear view of this canoe resting on a dock. The provided caption is below.

Thomson painted his canoe a distinctive dove grey, so it is easy to spot on the dock in front of Mowat Lodge. Proprietor of the lodge, Shannon Fraser is in suit. Across Canoe Lake, on the left, is Hayhurst Point, a favourite campsite of Thomson. The canoe disappeared after Thomson died. What happened to it is another mystery.
Source Link


For another writeup of a pre-fire Chestnut Cruiser find, be sure to check out Andre Cloutier's post here.


Read More..

Monday, December 12, 2016

Deck hatch new Plexiglas lens kit


This has been an idea for some while, we have the CNC machine to do the Plexiglas cutting, the correct UV proof sealant from Dow-Corning, so why not make deck hatch service kits?


This was in a nice safe place on the deck of a boat, it could not really be stepped on, the damage you see came from the sun and the method of bonding of the center handle.


This is from a Lewmar made hatch, in this case the sealing of the 8mm thick Plexiglas to the alloy frame is done with a rudder sealing strip, as you can see we can take this one apart.

We can do port lights, open or closed, deck hatches, clear, smoke or blue tint even white, which seems quite popular now.

Hatches can be by Lewmar, Gebo, Starlight, or probably what ever you have, we will need a template of the existing lens. We then CNC cut to shape and size, plus supply a tube of sealant to install the new lens with.

Local plastics suppliers have Plexiglas, Pespex, Lexan, Ampagard, and Perspex so we have a nice choice of materials to work from.

For those who are local to Cape Town and can remove their hatches we can offer a lens removal and fitting service.

How easy is that!

Roy


Read More..

Sunday, November 20, 2016

1878 Maliseet Paddle New Images


Many thanks to blog reader Luc P for emailing me a link with fantastic detailed pics of the circa 1878 Maliseet Paddle at the York Sunbury Museum I posted on earlier. This beautiful paddle has some of the most intricate carving I've seen and is on my to-do list of paddle replicas.


1878 Maliseet Paddle

According to the documention, Colonel John Simcoe Saunders (1795-1878) received this beautifully carved ceremonial Maliseet paddle as a gift from an Aboriginal artisan from the Kingsclear First Nation.

In previous posts I wrote about my attempt at a Photoshop adjustment to bring out the detail and also found a Flickr photo of the paddle on display. But these new shots show the amazing detail of the blade's incised decoration.


Exquisite Blade Details

The full link with more info and photos of other native artifacts are at this Virtual Exhibit.
Read More..

Thursday, November 17, 2016

Design 1908 Rose Wilder New To Market



One of the prettiest of all of the S&S boats built by Cantieri Sangermani of Italy, Rose Wilder started her life as Sandpiper. She is design #1908, launched in 1968.

Here are a couple of interior images.


The asking price is $295,000. The boat is lying in Newport Beach, California. Click here to access the full listing.

Principal Dimensions
LOA 50'-6"
LWL 34'-6"
Beam 12'-0"
Draft 7'-3"
Displacement 29,250 lbs
Ballast 13,000 lbs
Sail Area 1,040 sq ft



Read More..

Friday, November 4, 2016

New Update on Design 2758 25 Center Console



Yesterday we visited Brooklin Boat Yard to see the progress on the 25' center console runabout under construction there. The boat is coming along nicely. Sea trials are scheduled for late December (brrr).

Wiring Harness at Panel

Drive Line

Read More..

Thursday, October 20, 2016

New 998cc Hillman Imp news


Well, its news to me and does tie up a whole load of questions and tells us about what we have here.


The South African registration papers give the cars VIN number as one that starts with the letter R , this was taken from the UK registration V5 form that came with the car. The Imp Club say that this
is wrong and the number needs to start with the letters LH, how can this be and who is right?


Note



Note the Chrysler badge. Cars before 1967 had a much larger alloy plate and fitted in the engine bay on the left hand side looking from the rear.

 The car is now straight up for ease of access, all parts are now removed and the next job soon will be the cars black underseal repainting.

Seems the Imp Club are correct as the cars missing VIN plate was found yesterday and the engine/chassis number starts with the letters LH!

The ARCC is now making me a heritage document for the car, with that I may be able to get the licence transfer to my name more easily?  The cars original engine block is now known, its the 998cc engine I have had in rebuild for some while.

How easy was that?

The VIN plate also has other information, E 145/701 the 145 means Electric Metallic Blue and the 701 means black interior, this we had worked out but its nice to have the proof.

ARCC stands for Association of Rootes Car Clubs by the way.

Note, if you own one of the many versions of Rootes made cars you can apply for a heritage document for that car also.
 
http://www.blogspot.com/2011/07/hillman-imp-998cc-conversion.html
 
 
 
Roy


Read More..

Tuesday, September 20, 2016

Perkins 4108 marine engine new parts


The work load will soon allow the rebuild of a stripped down Perkins 4108M engine with a sea water heat exchanger, below is the parts package that will go into the engine.


Click on the picture to enlarge the image.

The parts include new pistons and liners, bearings to the crank and small ends to the pistons, plus all the correct gaskets to ensure an oil tight engine.


We have the engines original boat allocation documents, matching numbers and the workshop manual which will be sold with the engine.

The engine can be sold with or without the heat exchanger, the velvet drive 2:1 gearbox is an option, we can also consider taking your old Perkins 4108m as a part exchange.

Built to be ex stock or order, which ever is sooner!

Roy

Read More..

Sunday, September 18, 2016

Ideas Carolina skiff new boat price


In this post a lot of us would most likely allow you to prepare obtain important personal reference dependant on researching involving latest content Carolina skiff new boat price likelihood of talk seeing as a number of purchasers just what exactly human being desire it. for benchmark Recovering everyone benefit from an array of the search engines here are a few illustrations or photos that are relevant to Carolina skiff new boat price .

2017 Carolina Skiff 238 DLV For Sale In Bayville, NJ - BoatShopper.com Carolina Skiff Boats For Sale 2013 Carolina Skiff Boat for Sale 2013 Carolina Skiff Motor Boat in 2014 Carolina Skiff DLV 198 2014 Carolina Skiff Dlv Fishing Boat in Carolina Skiff J12 Photo 1020101978 Boatsville - New and Used Carolina Skiff Boats

Pictured previously mentioned you may get a hold of plus help you save the application inside the home pc storage device in order that if you want it are generally precisely contacted comfortably. Carolina skiff new boat price is the key for you so, who likes to affiliated tips. So you went on that labor to get the details regarding the main benefit of our own website visitors. Take a note of our own internet site in which enables you to get a lot more posts relevant to this key terms

Carolina skiff new boat price - for helping establish the interest our targeted visitors will also be very pleased to create this site. bettering the grade of this article can we all test a later date to enable you to actually comprehend subsequently after reading this content. In conclusion, this isn't a small number of sayings that really must be built to encourage an individual. however , with the boundaries for terms, we will exclusively offer a Carolina skiff new boat price talk in place in this article


Read More..

Saturday, September 17, 2016

New products from the Politically Incorrect Chandlery


With Xmas just around the corner our buyers have been searching high and low for holiday gift items for the truly discriminating boater, and these unique new items are now available. Don't wait, stock is limited on some items, and we can assure you these are only available at PIC, your exclusive high end marine chandlery.

Our Super Bright Spot Lights

Put a bank of four of these 747 landing lights on your hard top, and save thousands when compared to those expensive and very complicated night vision systems.

You can now turn night into day with the simple flip of a switch. See markers, and everything else clearly over a mile away. Use them to light up those creepy dark anchorages in the middle of nowhere, and surprise your floating neighbors. Four of these babies put out an incredible 12,000,000 nova bright lumens. Each spotlight comes in a stainless steel enclosure. $325.00 each, four for $1200. 12VDC to 28VDC transformer required, available online.

LED Party Light

Throw your boat's disco ball away, we have the answer. We loved this 12 volt LED party light at first sight. Bath your cockpit in the warm color of your choice, or let your stereo's output create a riot of intensely flickering colors. There are hundreds of patterns from spinning vortexes to frantic blinking images. Your guests won't be leaving till they're heaving. Wimpy under the coaming LED rope lights just can't compare. $179.99 + S&H
Warning, some flashing rates, and patterns may cause severe nausea, or epileptic seizures especially if underway. Blink responsibly.

Depleted Uranium Anchors

Tired of anchors that don't hold the bottom? Afraid your anchor will let loose in a storm? You can calm those fears with our new line of Bruce style depleted uranium anchors. These indestructible anchors are manufactured by a small foundry located in Pripyat Russia. The foundry assures us there is no shortage of raw materials.

These have nearly four times the weight of those cheaper store bought steel anchors of the same size. Where you drop them, is where they will stay, and fishermen will appreciate the speedy free fall decent to the bottom. We guarantee these anchors will outlast you, and they won't corrode leaving unsightly rust stains on your bow. The bonus is the romantic warm glowing radiating from your bow. 160lb $229.00, 350lb $442.00, and 1100lb $1229.00. Shipping by ground only, some anchors may require more trim tab use in smaller vessels.

The Boat Horn With An Attitude!

We can't believe what a great buy we got on these boat horns. Our buyers spotted them in an auction held by the city of Detroit. They were part of the city's emergency alert warning system.

Why depend on those puny "air in a can" and weenie electric horns. With this siren on steroids you will be heard by everybody for miles around. Wake up that sleeping bridge tender, know you will be heard in the fog, and let that slow poke in front of you know you're passing him. With this horn your message is "Move over... right now!" $1,252.99 110VAC required.

Special Scrimshaw Offering

These genuine elephant ivory Scrimshaw carvings are a rare find. Before you get concerned, we want to assure you that child, and sweat shop labor are not used to make these. They are actually laser etched using historic designs.

Due the current high price of ivory, we are selling these for just $300 an inch, with the laser etching scaled to each piece. Each one of these masterpieces are mounted on a hand finished plank of old growth Honduran mahogany. Call us for an exact quotation. Delivery in the US in international waters only. Product of Somalia.

Make Your VHF Get-R-Done!

Weary, and bored with having to just use 25 watts when you talk on the VHF? Don't want to wait while other boaters blather on and on endlessly? Do you desire extra VHF range, and want real power? This easy to install inline amp is the one for you. It's powerful enough to drown out everyone else, and have your voice heard. Ran out of ice or margarita mix, and need to hail your buddy? Key that VHF mic and you will blast away at 200 watts into the atmosphere leaving a RF contrail behind you. At the VHF's low power setting you still get an impressive 40 watts. Provide your family with the safety margin you may need in case of an emergency. $330.00. Optional quick disconnect kit, $59.00

Beluga Whale Leather Sailing Gloves

Stay in touch with organic mother ocean with these fashionable, but sturdy gloves. For sustainability we use only all natural farm raised beluga whale leather. Double layers over the palms protect your hands from those coarse sail boat ropes, and velcro straps snug them up on your wrist. The insides are lined with river otter fur to keep your hands warm in even the coldest conditions. These won't last long, so order early. SM&L sizes $234.00. Our whale penis leather versions (large sizes only) are still available by special order for only $499.00


Anchor photo by Wikipedia user Bundesarchiv, B 422 Bild-0010 / CC-BY-SA, Bruce anchor photo by user Billion.


Read More..

Thursday, September 8, 2016

New York 32 Design 125



Here's a nice shot of a couple of NY32s: Falcon and Siren. Sloop versus yawl. Nice.
Read More..

Monday, September 5, 2016

New wood canoe


New wood canoe is the trend of today's popular content, we realize from your examination with the search results to provide you with unique expertise we all test to look for photos in connection with your New wood canoe . additionally, the gains you can understand less than needs to be most of the shots is simply a good example.

Some images on New wood canoe


Wood-Canvas Canoes – General Canoeguy's Blog Wooden Canoe Paddles Stock Images - Image: 32769664 Knowing Wood kayak plans kits Canoe sailing plan Outboard catamaran plans Plan make easy to build boat PDF Model Boat Plans Wooden metal boat plans ยป boat4plans diypdf Canoeing and Island Camping in Kejimkujik National Park I Backpack

New wood canoe - it's already been submitted along with the expectancy which specifically you may easliy enhance beneficial to absolutely everyone. This informative article can easily assist being a guide for all those confounded to find the most suitable help This New wood canoe content could be your better alternative to remain utilized on their work schedule, the way it possesses its very own approach will probably think far more content New wood canoe - Handy available for you for this reason people are attempting get the best origin which in turn may help you see drive free of indecision. bear in mind so that you can take note of these pages, since probably some day you will want the idea rear as your inspirational ideas.


Read More..

Tuesday, August 9, 2016

Visit to new wetland


I wake to the dripping of water and the day brings a heavy sprinkle or a soaking mist, depending on when you are out in it. I have finished a couple of projects and fell unburdened. The calm day gives me a chance to explore some new wetland that I located on the far side of the big lake.

I head out for the portage in my red wool jacket, an old item that sheds rain as well as most raingear, an old item that my dad gave me. I wear it on special occasions, such as anytime I am in my canoe or outside. It always brings me an inch closer to my dad, a foot closer to the forest and lakes of my home state, and it moves me well back in time.

At the lake's edge, the rain stops and I pack the wool jacket away. I have a 2 mile crossing ahead under calm grey skies. The wetland is another mile. When I looked at it on a map, I saw the potential for a healthy spot. It is a "patch" and not just a transition zone, so it has the possibility of having a vibrant interior with a fair amount of plant and wildlife diversity.


There is an inlet that penetrates the shoreline. It is guarded by some cattails and a shallow mud bar, but the canoe passe by with ease. In my layman limited knowledge, it appears to be quite a healthy spot. There are cattails and the appropriate shrubs and alders. No blackberries....and lots of birds. The inlet ends in a high grass wet meadow, the continuing passage too twisty for the canoe. As I paddle back, I hear running water up a brushy opening to the right. I can get in, but not far enough. It appears that there is a beaver dam ahead, although it may not be well tended.

I have seen some trimmed branches on the way in, but no evidence of a lodge. Then, I see a large mammal serpentine swimming. But, I only get a glimpse - otter most likely, but maybe a beaver. A second later, a muskrat swims towards me (no confusion here, a muskrat is much smaller than either an small otter or a small beaver).


I spot a Virginia rail and a cedar waxwing, neither of which I've ever seen in person before.

The wind stays down and I have a calm crossing back to my home marsh with little to note other than an osprey passing overhead as I neared Wilson Point.
Read More..